FEATURES
Application: For Electric Control System of Communication Power Supply、
Engineering Machine、Electro-motion Forklift、Motor Car、Train、
Watercraft and UPS etc.
01 Nomination(nomogram)
02 Special Instructions
Product coil is excited by positive and negative pulse(1,2points), 200ms≤t≤1s,Long time continuous energizing is not allowed, Operation frequency no more than 6time/min,lt`s square pulse and positive pulse makes the contact close while negative pulse makes the contact open,After the excitation,the permanent magnet in product keeps the state of the contact。
03 Use conditions required
NO. |
Parameters |
Product code |
ZJ80C、ZJ100C series |
||
1 |
Ambient temperature: |
(-40~+60)℃ |
2 |
Relative humidity: |
(Up to 98% at +20℃) |
3 |
Vibration freq .at the fixed position: |
(10~200)Hz、Acceleration≤3.5g |
4 |
Shocking |
(60~100)time/minute、Acceleration≤4g |
5 |
Mounting directions |
Optional |
04 Basic technical data
NO. |
Parameters |
Product code |
|||||||
ZJ80C、ZJ100C series |
|||||||||
1 |
Rated coil volt (VDC) |
12 |
24 |
30 |
48 |
60 |
80 |
120 |
|
2 |
Coil Current |
≤700mA |
|||||||
3 |
Minimum pulse width |
200mS |
|||||||
4 |
Operating volt in cold state at (20±5)℃(V) |
Pick-up |
(20~60)% Rated coil volt |
||||||
Release |
(20~60)% Rated coil volt |
||||||||
5 |
Fluctuating range of power supply volt |
(85%~110%) rated volt |
|||||||
6 |
Rated volt of contact circuit (V DC) |
60 VDC |
|||||||
7 |
Rated load current of contact circuit (A) |
80A、100A |
|||||||
8 |
Contact volt drop of contact at 50A: |
≤50mV |
|||||||
9 |
Puncture(volt) strength |
50Hz,1000V AC,1min |
|||||||
10 |
Max. make-break ability of contact |
(Connect four times rated load current, make and break once for )5ms |
|||||||
11 |
Mechanical life |
100,000 Ops |
|||||||
12 |
Working duty |
Continuous |
05 Configurational mounting diagram
06 Circuit diagram